Product Categories
Contact Us
Company : Tianjin Hengji Int'l Trade Co., Ltd
Address : No.2-2-1103 Shuixiyuan Zhongbei Town Xiqing Dist. Tianjin China
E-mail : tj_hengji@163.com/ tj_hengji@hotmail.com
Website : www.tianjinhengji.com
Photo : 86-13820484644
Fax : 86-22-83726915
Skype ID: tianjinhengji
Contact Person: Linda
Polyimide film F46 Adhesive Tape
Category: POLYIMIDE FEP TAPE
Publish Time: 2016-03-15 07:14
Name:Polyimide film F46 Adhesive Tape
Type:TH6251
I.This product is made From Polyimide film "Doctor-blading Process" painted with FEP on single surface or double surfaces and cut after drying, this tape applies to insulation material for electrical wire winding, which is molded through melting at the temperature of 350 -380°C for half an hour
Type:TH6251
I.This product is made From Polyimide film "Doctor-blading Process" painted with FEP on single surface or double surfaces and cut after drying, this tape applies to insulation material for electrical wire winding, which is molded through melting at the temperature of 350 -380°C for half an hour

Price : ¥0.00
Delivery Fee : ¥0.00
Quantity :
Delivery Fee : ¥0.00
Quantity :
Specification:
1. Appearance: the adhesive tape is clean and smooth, without air bubble and impurities
2. Size
1). Length: the length of a reel of adhesive tape is not less than 300m, the number of section is not more than 3 sections, minimum length of them is not less than 100m
2). Width: the width and its allowance of the adhesive tape is from 6mm to 500mm±0.5mm.
3). Thickness: nominal thickness and allowance of the adhesive tape: we can supply tapes with different thickness according to requirement of customers, their allowance is±0.006mm or supply according to the requirement of custormer.
4)
Ⅱ. Packing, Mark, Preservation and Transportation
1. The film should be provided in rolls and wound up to the pipe core, each roll is well packed and loaded with plastic bag to be placed into dry and clean box.
2. The each box packing should be marked with the type, product specification, size, lot number, gross weight, net weight, date of manufacture, name of the manufacturer and the product acceptances certificate is attached. At the same time the painting words of Damp-proof collision-proof etc.
3. The should be pressured in dry and clean room, the preservation period from the date of production is two years and can still be used when it is qualified in case of the preservation period is exceeded and checked according to standard./
1. Appearance: the adhesive tape is clean and smooth, without air bubble and impurities
2. Size
1). Length: the length of a reel of adhesive tape is not less than 300m, the number of section is not more than 3 sections, minimum length of them is not less than 100m
2). Width: the width and its allowance of the adhesive tape is from 6mm to 500mm±0.5mm.
3). Thickness: nominal thickness and allowance of the adhesive tape: we can supply tapes with different thickness according to requirement of customers, their allowance is±0.006mm or supply according to the requirement of custormer.
4)

Ⅱ. Packing, Mark, Preservation and Transportation
1. The film should be provided in rolls and wound up to the pipe core, each roll is well packed and loaded with plastic bag to be placed into dry and clean box.
2. The each box packing should be marked with the type, product specification, size, lot number, gross weight, net weight, date of manufacture, name of the manufacturer and the product acceptances certificate is attached. At the same time the painting words of Damp-proof collision-proof etc.
3. The should be pressured in dry and clean room, the preservation period from the date of production is two years and can still be used when it is qualified in case of the preservation period is exceeded and checked according to standard./
4. During the preservation and transportation, damping and mechanical damage should be avoided.